cloud_queue

RPCM Smart PDU simultaneously provides:

UPTIME Improvement

  • improve reputation
  • less users’ complaints
  • less SLA compensations
  • no need to change expensive equipment

DOWNTIME Reduction

  • solve problems faster
  • automate recovery
  • lessen the number of visits to the location
  • speed up troubleshooting

Saving

  • use cheaper UPS
  • optimize energy consumption
  • choose efficient equipment when upgrading

Video

00. RCNTEC RPCM Mining Edition + Bitmain ASIC S9/D3/L3+ = more profit and less downtime for mining operations

01. RCNTEC RPCM ME (Mining Edition)

02. RCNTEC RPCM Introduction

03. RCNTEC RPCM Short Circuit Protection

New

04. 1 + 1 = 3! UPS + RPCM Smart PDU = increasing uptime + decreasing downtime + saving time and money!

Features & Benefits

Remote power management of Individual Outlets

System administrators can turn on/off and reset any of the 10 outlets without having to go to the location of the equipment, as well as handle cases where the equipment was turned on/off without authorization, was accidentally unplugged, or experienced a power supply failure.

More details >
Outlet Level Short Circuit Protection

If a short circuit occurs on one of the connected devices, RPCM will automatically cut off only the power going to it, thereby keeping the remaining devices up and running - both the one connected to RPCM and the others connected to the same busbar. Since ATS is used for backup power supply, short circuit protection helps prevent both inputs to the rack from being turned off, while also preventing the equipment's power supply on the rack from shutting down as a result of a short circuit on one of the consumers. It also helps obviate the painstaking process of having to locate the failed consumer affected by the short circuit prior to restoring power supply on the rack.

More details >
Outlet Level Short Circuit Protection

If a short circuit occurs on one of the connected devices, RPCM will automatically cut off only the power going to it, thereby keeping the remaining devices up and running - both the one connected to RPCM and the others connected to the same busbar.

More details >
Configurable Electrical Current Consumption Limits for Each Outlet

System administrators can prevent fire hazards from occurring by setting individual limits on current consumption on each outlet, through administrator notifications, or by automatically cutting off power supply to a consumer that has exceeded the defined limit.

More details >
Power Meters on Each Individual Outlet

Commercial data processing centers can offer clients better prices on colocation when compared with competitors, as it's possible to measure power consumption for each client device.

More details >
Best in class integration capabilities with REST API/SNMP

Use industry standard REST API/SNMP protocols to simplify operations with easy scripting. Integrate RPCM Smart PDUs into your billing/monitoring/management systems and even customer portals to have your power infrastructure data and control in your and your customers' favourite interfaces!

ATS - Automatic Transfer Switch

If power on an input is lost or drops in quality, the device automatically switches consumers to another input without interruption to power supply.

More details >
ICMP/TCP port/consumption based watchdog with automatic power reset

Allow 95% of problems with freezing equipment to be solved automatically!
RPCM is able to automatically reboot the hung equipment, determining the hang to reduce power consumption, decrease the hashing rate of mining equipment, ICMP (ping loss) and access to the TCP port on which the service is unavailable. Thanks to the automation of the reboot in case of hang-ups, a significant reduction in both the time of service unavailability and maintenance costs of geographically distributed equipment are achieved.

Customizable Activation Sequence and Delay of Outlets to Initiate Service Correctly and Eliminate Inrush Currents

System administrators can essentially guarantee the equipment is turned on after a complete outage. Also, they can define the activation sequence and delay when turning on the equipment after the outage, which allows them to correctly launch the IT infrastructure and information systems.

More details >
Proper Grounding Diagnostics

RPCM prevents failures and equipment malfunction. It also increases power safety during equipment use thanks to automatic monitoring and proper grounding indication.

More details >
Highest Density of Controllable Power Supply Outlets with Power Meters per 1U in the Industry for Systems with ATS

10 manageable outlets per unit. As a result, one less power management device is required per rack when compared to competitors.

The highest-in-the-industry number of powered miners powered by a single Smart PDU

Use fewer PDUs to power all of your equipment!
Connect the maximum amount of equipment!
Up to 90 connections (30 managed channels by 3 connections per channel)
Power up to 90 x S9 class miners or 60 x S17Pro class miners from one RPCM

Remote power management of Individual Outlets

System administrators can turn on/off and restart any of the 10 outputs without visiting the site where equipment is installed and they can control unauthorized connection/disconnection of equipment, accidental supply cable unplugging or PSU failure on connected equipment.

...

ATS - Automatic Transfer Switch

If power on an input is lost or drops in quality, the device automatically switches consumers to another input without interruption to power supply.

...

ICMP/TCP port/consumption based watchdog with automatic power reset

Allow 95% of problems with freezing equipment to be solved automatically!
RPCM is able to automatically reboot the hung equipment, determining the hang to reduce power consumption, decrease the hashing rate of mining equipment, ICMP (ping loss) and access to the TCP port on which the service is unavailable. Thanks to the automation of the reboot in case of hang-ups, a significant reduction in both the time of service unavailability and maintenance costs of geographically distributed equipment are achieved.

...

Outlet Level SC Protection

If a short circuit occurs on one of the connected devices, RPCM will automatically cut off only the power going to it, thereby keeping the remaining devices up and running - both the one connected to RPCM and the others connected to the same busbar. Since ATS is used for backup power supply, short circuit protection helps prevent both inputs to the rack from being turned off, while also preventing the equipment's power supply on the rack from shutting down as a result of a short circuit on one of the consumers. It also helps obviate the painstaking process of having to locate the failed consumer affected by the short circuit prior to restoring power supply on the rack.

...

Outlet Level SC Protection

If a short circuit occurs on one of the connected devices, RPCM will automatically cut off only the power going to it, thereby keeping the remaining devices up and running - both the one connected to RPCM and the others connected to the same busbar.

...

Customizable Activation Sequence and Delay of Outlets to Initiate Service Correctly and Eliminate Inrush Currents

System administrators can essentially guarantee the equipment is turned on after a complete outage. Also, they can define the activation sequence and delay when turning on the equipment after the outage, which allows them to correctly launch the IT infrastructure and information systems.

...

Configurable Electrical Current Consumption Limits for Each Outlet

System administrators can prevent fire hazards from occurring by setting individual limits on current consumption on each outlet, through administrator notifications, or by automatically cutting off power supply to a consumer that has exceeded the defined limit.

...

Proper Grounding Diagnostics

RPCM prevents failures and equipment malfunction. It also increases power safety during equipment use thanks to automatic monitoring and proper grounding indication.

...

Power Meters on Each Individual Outlet

Commercial data processing centers can offer clients better prices on colocation when compared with competitors, as it's possible to measure power consumption for each client device.

...

Highest Density of Controllable Power Supply Outlets with Power Meters per 1U in the Industry for Systems with ATS

10 manageable outlets per unit. As a result, one less power management device is required per rack when compared to competitors.

...
The highest-in-the-industry number of powered miners powered by a single Smart PDU

Use fewer PDUs to power all of your equipment!
Connect the maximum amount of equipment!
Up to 90 connections (30 managed channels by 3 connections per channel)
Power up to 90 x S9 class miners or 60 x S17Pro class miners from one RPCM

...
Best in class integration capabilities with REST API/SNMP

Use industry standard REST API/SNMP protocols to simplify operations with easy scripting. Integrate RPCM Smart PDUs into your billing/monitoring/management systems and even customer portals to have your power infrastructure data and control in your and your customers' favourite interfaces!

...
  • Easy integration with external monitoring systems (SNMP versions 1/2c/3 supported)
  • Alarms and notifications by e-mail
  • Simple integration with customer applications via REST API
  • Precise time synchronization with external reference time sources for correct time based correlation of journaled events
  • Handy network tools
  • Easy software upgrades without turning off consumers

Case study

RPCM Other solutions
Automatic transfer switch with transfer delay no more than 14ms Yes No
Outlet Level SC Protection Yes No
Remote power management Yes Yes
Power Meters on Each Individual Outlet Yes No
Configurable Electrical Current Consumption Limits for Each Outlet Yes No
Customizable Activation Sequence and Delay of Outlets to Initiate Service Correctly and Eliminate Inrush Currents Yes No
Proper Grounding Diagnostics Yes No
Statistics, Graphs, and Historical Data Yes No

1 For the owners of mining farms (installations of container and stationary type)

The requirement of remote power control significantly increases in case of the mobile container installations usage for mining or geographically distant mining installations.

RPCM3250 – the Remote Power Management Module that provides indispensable capabilities for monitoring, managing and protecting the power of your cryptocurrency mining installations.

The device provides:

  • Remote power monitor and management on a single or multiple consumers level
  • Revenue Loss Prevention due to miner equipment malfunction or hashrate decrease
  • Simplicity and speed of deployment - 25 000 miners for 2 weeks
  • 2 x PDU per container with 180 x ASIC S9
  • Ability to power up to 90 ASIC S9 from a single PDU
  • Automatic monitoring and power-up reboot of a hung device
  • Convenient and simple administration
  • Integration into any monitoring or billing system
  • Email and mobile app notifications
  • Fire protection
  • Short Circuit Protection
  • Electricity consumption accounting, accurate to a single of multiple miners
  • Reduction of qualified staff
...

2 For Business Сenters

Fire control and fire extinguishing systems always solve a problem that has already happened. The Smart PDU RPCM3250 will not allow a fire in advance, preventing a malfunction leading to a fire at the consumer level.

Open and close leased offices automatically, based on payment collection.

RPCM3250 – The Remote Power Management Module, that completely replaces and fulfills the functionality of an electrical rack with automatic switches and electricity meters, also includes the following features:

  • Fire protection (Prevention of fire hazard situations due to configurable consumption limits at each terminal, as well as wiring insulation deterioration or device components malfunction)
  • Owner control of the consumed amount of electricity accurate to the office or premises
  • Automated consumption data output to external systems accurate to the office or premises
  • Discovery of unauthorized connections to the power grid and energy consumption
  • Short Circuit Protection
  • Connection up to 30 offices to a single RPCM module
  • Access to historical data and statistics on electricity consumption for each consumer
  • Ability to disconnect tenants from power grid remotely in case of no payment
...

Specifications

Module rpcm Parameter Value
Power rating 173V - 140 kVA Max, 129 kVA Nominal, 112 kVA Derated
208V - 168 kVA Max,156 kVA Nominal, 134 kVA Derated
240V - 194 kVA Max, 180 kVA Nominal, 155 kVA Derated
Input Connection type Delta type, 3 phase+protective conductor (protective ground) (two power strip terminals 70-185 mm2 for each connection)
Voltage and current rating 173-240V (3 phase+protective conductor (protective ground)), 467A(270A) Max/432A(250A) Nominal/373A(216A) Derated(P(P-P))
Frequency 50/60 Hz ± 5%
Grounding control Indication of grounding presence/absence
Output Number of connections 90 connections, 30 managed channels (3 connections per channel)
Connector type Spring loaded clamp terminals: 4 mm2 (6 mm2 without ferrule) for phase and neutral conductors, 2.5 mm2( 4 mm2without ferrule) for protective ground conductors
Voltage and current rating of the managed channel 173-240V (P-P),
30 x 27A Max/25A Nominal/21.6A Derated for each managed channel
Overcurrent and Short Circuit Protection Parameters - Overload protection: configurable 0.1-27А (default setting 25A)
- Short circuit protection: 3 x iNom (trips at a short-circuit current of 75A)
Power consumption metering Separate power consumption metering on each managed channel
Time of powering on managed channel Programmable (default delay 1 second)
External indicator lights (display) Input state - On/Off/voltage and frequency params out of range alert (separately in phases)
- Grounding indication presence/absence
Сhannels (outlets) state On/Off/Short circuit/Output overcurrent/Input overcurrent
Remote control and remote monitoring Input state - On/Off/voltage and frequency params out of range alert
- Current/Voltage/Frequency/Wattage
- Grounding indication presence/absence
Channels state - On/Off/Short circuit/Output overcurrent/Input overcurrent
- Managing current cutoff thresholds and power-on delay
Power consumption metering Separate power consumption metering on each of 30 managed channels
Supported protocols - HTTP/HTTPS (WEB Interface/REST API)
- SSH
- SNMPv1, SNMPv2c, SNMPv3, SNMP Traps
- SMTP
- RADIUS
Automation (Watchdog) - Output channel (outlet) reset, if the miners hash rate decreases
- Output channel (outlet) reset, if there are no responses to ICMP requests (pings)
- Output channel (outlet) reset, if the TCP port is unavailable
- Output channel (outlet) reset, when the current decreases
General parametres Communication interface 3 х Ethernet 10/100 Mbps (one per each input)
Accessories included Electric panel, wall mounting kit, quick install guide
Panel size (width x height x depth) 600х610х250 mm, wall mounting
Module weight 33.86 kg
Operating temperature 0 ~ +40 °С
Storage temperature -20 ~ +60 °С
Operating humidity 45 ~ 85 % (no condensation)
Cooling Passive
Noise level Under 30 dBA (powering on/off and switching ports)
Default Warranty 1 year

PDFs to download

Technical Specification

User Manual

Quick Install Guide

Download the mobile application

app iOS

Peter C.

General Director, HOSTKEY

We’re keenly interested in a solution that combines an automatic transfer switch with remote power management, short circuit protection, and power meters on each individual outlet. This kind of solution will make our colocation service significantly more appealing and convenient for clients without a noticeable hike in service cost.

...

Alex O.

Product manager, OCS Distribution

Sometimes power control modules, including smart ones made by foreign manufacturers, have less functionalities. Specialists and developers from the Russian company RCNTEC offer a new way of looking at equipment power supply organization by having extended PDU capabilities. The Resilient Power Control Module's (RPCM) functionality provides a unique capability for monitoring and managing equipment power supply, which can definitely set a new quality standard when it comes to power distribution modules within server rooms. We’re looking forward to when this unique PDU module goes on sale and to the latest from RCNTEC to appear in our showroom.

...

Antony S.

Director of Development, Tempesto Group

We’ve been supplying equipment to data centers for more than 10 years already, and we’re always in search of the best solutions. RCNTEC's new development Resilient Power Control Module (RPCM) is of great interest to our clients.

...

Maksim S.

Technical Director at Nutanix for Eastern Europe, the Russian Federation, CIS, Israel, and Turkey

Devices for power monitoring and management in data centers are an extremely important and in-demand element of today’s IT infrastructure. RCNTEC's RPCM was a pleasant surprise both at the level of hardware and software. It’s especially worth noting its convenient status indication for power outputs and voltage, and the possibility of integrating it into any contemporary program monitoring tools. It’s a pleasure to see Russian products of this caliber

...

Nikolay Minaev

Owner of nine cryptocurrency mines

Some of the key factors in mining are the farm’s electric power, the extent of its proper organization, and the farm’s level of effectiveness in bringing in profits. Not only do failures, freezes, overheating, and crashes create setbacks to recouping one’s investment, but they can also cause damage to equipment or lead to investment loss altogether, if a fire were to occur. The remote power control device developed by RCNTEC - RPCM Mining Edition - allows one to not only reduce risks, but also boost the effectiveness of a cryptocurrency mining farm’s performance

...

Alexander Kuznetsov

Technical Director at StoreData

RCNTEC offers a new way of looking at power supply organization for devices and expands upon the standard capabilities of PDU. We’re convinced by this after having tested RPCM’s basic version at our lab. All the functions reported by the manufacturer work at a high level of quality and help to provide for a safe, stable, and controllable supply of power to equipment. As far as price goes, RPCM compares favorably against similar devices with fewer functions. This new, more powerful version, which has kept all the basic functions, will be of interest to our clients using high-performing, energy-intensive solutions

...

Galina Veselukha

LLC InSAT Deputy CEO for projects

InSAT has been developing and supplying a wide range of solutions for industrial automation since 1988. We research the market and regularly enrich our portfolio with the most modern and advanced solutions of the domestic and foreign markets. We have tested RPCM Smart PDUs produced by RCNTEC and confirmed that RPCM conforms to all declared characteristics and thanks to a wide range of functions is able to bring power management of industrial facilities to a new level. As the module supports the standard SNMP protocol, it can be easily integrated into any system, including MasterSCADA. The RPCM configuration for Multi Protocol OPC Server will be included in the standard set up. We will recommend this solution to our customers and include it in applicable projects if possible.

...

Alexey Kuznetsov

ITB CEO

GTBrain offers its customers only really useful products in the field of crypto currency mining and vouches for their quality. "Mining-PDU RPCM ME 63A" control module significantly increases the reliability and manageability of mining farms, the module has wide functionality and many advantages. Smart-PDU made by RCNTEC has extremely useful functionality for miners - automated monitoring of hash rate of mining equipment and restarting in case hash rate goes below expected values. This functionality, naturally, positively affects on the income of our clients - crypto currency miners. RCNTEC has already established itself as a reliable partner and high-level developer. We are confident that we will have effective cooperation ahead and many interesting projects across the country.

...

Alexey Yurov

Torlion's CTO

As we implement projects we pay great attention to modern technologies that allow us to build reliable infrastructure for enterprises and ensure continuity of business processes even in critical situations. RCNTEC's RPCM Smart PDUs meet our requirements, provide the most stable power supply and allow us to quickly and efficiently resolve any issues related to power distribution.

...

Alexander Lukin

Director of the system integration department of OLLI IT

We are aimed at helping Russian companies and government agencies to improve their work efficiency through modern technologies. Therefore, we are pleased to add to our portfolio one of the best and most functional solutions on the Smart PDU market - RPCM smart modules.

...
Р

Konstantin Ivanov

Head of IT infrastructure support group at Salym Petroleum

We are closely monitoring technological innovations and try to adopt best in the World solutions to increase our business efficiency. We have decided to use RPCM Smart PDU from RCNTEC at all our new Oil fields once tests have been completed. RPCM is convenient and simple tool, which resolves wide range of problems with electricity and thanks to possibility to control each outlet remotely we significantly increase speed of response and avoid downtimes of telecom infrastructure, proper functioning of which is essential to oil production.

...

Kirill Denisov

Head of Services and Facilities Development department of Intellin LLC

We continuously test the latest equipment and try to put the best technical solutions on the market into daily use. This concerns not only our customers, but also our own infrastructure. Therefore, we were pleased to discover the Smart PDU RPCM from RCNTEC, with the functionality that not only justified, but also exceeded our expectations.

...

Alexander Yusin

Technical Director, IHOME LLC

We chose the Smart PDU RPCM for several reasons. The main task that intellectual modules RPCM perform in our data center is to maintain uninterrupted operation and increase the uptime of servers and network equipment with single power supply units. Thanks to the built-in Automated Transfer Switch (ATS) function, when the power supply at one of the inputs is lost or degraded, the device automatically switches consumers to another input without interrupting the power supply. The presence of electricity meters at each output allows us to estimate the actual electricity consumption of each piece of equipment, which allows optimal placement of equipment in racks. Another important point when choosing the Smart PDU RPCM for us was the price of the device, which compares favorably with foreign, less functional counterparts.

...

Anton Tarashchansky

CTO at Kontur group

For us, the main function of RPCM is remote power management of devices prone to freezing. For example, satellite TV receivers and some other multimedia devices. Smart PDU RPCM automatically reboots hung equipment or send failure notifications to our administrators.

...

Our Smartest Customers

Countries, where RPCM Smart PDUs are installed

Countries

Azerbaijan Armenia Bulgaria Germany Georgia Italy Kazakhstan Kyrgyzstan Latvia Malaysia Russia Saudi Arabia Singapore USA Netherlands Finland Belarus Hong Kong Canada Romania Uzbekistan Argentina

Industries, using RPCM Smart PDUs

Industrial application

image/svg+xml background Broadcasting Data Centers Medicine Tourism Logistics Gold Mining Transportation System Integration Payment Systems Safe City Television Agriculture Power Engineering Telecom Households Satellite Navigation Auto-dealerships Banking Pharmacies Software Development Manufacturing Metallurgy Internet Providers Hosting Providers Instrumentation Oil and Gas Retail Aviation Cryptocurrency Mining Education Federal Government Agencies Building and Construction Consulting Insurance Utilities Space Industry

«Al-Style»

Almaty, Nursultan Nazarbayev 19
+7 (727) 300 0 300
8 (800) 080 55 75
*178 - Victoria Simonova
*862 - Kirill Morgun
info@rpcm.kz

Contact Us

Requred
Requred
Requred
Requred

Contact the manufacturer

RCNTEC RPCM


+7 (495) 009 87 87
3, Pokovaya st, Moscow, Russian Federation, 127018
info@rpcm.pro

© RCNTEC RPCM Privacy Policy

Your message has been sent successfully.

The company representative will contact you shortly.
Thank you for being interested.

We’ve received 10 attempts to send us a message within an hour - this looks like a lot...

Please try again in minutes.
Thank you for understanding!